Firmware Version 1.0.1.12 - Grandstream Networks UCM6510 User Manual

Firmware Version 1.0.1.12


Added Active Calls feature to monitor call status and barge in active calls

Added support to disable the trunk for VoIP trunk and analog trunk [Table 57: Create New SIP Trunk]
[Table 46: Analog Trunk Configuration Parameters]

Added RBS support on T1

Added Frame Relay support on Data Trunk [DATA TRUNK]

Added 'Assign CIC to D-channel' option on SS7 settings page [Table 50: Digital Hardware Configuration
Parameters: E1 - SS7]

Added 'First CIC' option in SS7 configuration [Table 50: Digital Hardware Configuration Parameters: E1
- SS7]

Added 'D-Chan' selection for PRI and SS7 in editing digital ports [Table 49: Digital Hardware
Configuration Parameters: E1 – PRI_NET/PRI_CPE] [Table 50: Digital Hardware Configuration
Parameters: E1 - SS7]

Added support for Ring simultaneously feature for extensions [Table 32: SIP Extension Configuration
Parameters]

Added support for Music On Hold selection per extension [Table 32: SIP Extension Configuration
Parameters]

Added support to disable this extension per extension [Table 32: SIP Extension Configuration
Parameters]

Added ability to set personal password for making outbound calls per extension [Table 32: SIP
Extension Configuration Parameters]

Added 'TEL URI' configuration for SIP extension/VoIP trunk [Table 32: SIP Extension Configuration
Parameters] [Table 57: Create New SIP Trunk]

Added E&M Immediate and E&M Wink signaling for T1 [Table 54: Digital Hardware Configuration
Parameters: T1-E&M Immediate/E&M Wink]

Renamed the 'network backup' settings items to 'data sync' [Data Sync]

Added "Download Search Result" in CDR [CDR]

Added office time and holiday setting support [Office Time] [Holiday]

Added time condition for call forward [EXTENSIONS]

Added support to monitor FXO trunk using SLA [SLA STATION]

Added One-Key Dial function [SPEED DIAL]

Added Follow Me support [FOLLOW ME]

Supported external number as the key pressing event of an IVR

Improved APIs for Zero Config templates and settings [PROVISIONING]

Supported GXP16XX, Surveillance and GS_wave models in Zero Config [PROVISIONING]

Added advanced settings for devices discovered in Zero Config [Device Configuration]

Added ability to delete multiple recording files at one time [Recording Files]

Added call queue destination if no answer/timeout [Table 77: Call Queue Configuration Parameters]

Added call queue Music on Hold customization [Table 77: Call Queue Configuration Parameters]

Added restricted AMI access [ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)]
Warning: Please do not enable AMI on the UCM6510 if it is placed on a public or untrusted network
UCM6510 IP PBX User Manual
P a g e | 27