Api Configuration; Table 118: Cdr Api Configuration Files; Figure 230: Cdr->Recording Files - Grandstream Networks UCM6510 User Manual


Click on "Delete Selected Recording Files" to delete the recording files.

Click on "Delete All Recording Files" to delete all recording files.

Click on to download the recording file in .wav format.

Click on to delete the recording file.

To sort the recording file, click on the title "Caller", "Callee" or "Call Time" for the corresponding column.
Click on the title again can switch the sorting mode between ascending order or descending order.

API Configuration

The UCM6510 supports third party billing interface API for external billing software to access CDR and call
recordings on the PBX. The API uses HTTPS to request the CDR data and call recording data matching
given parameters as configured on the third party application.
Before accessing the API, the administrators need enable API and configure the access/authentication
information on the UCM6510 first. The API configuration parameters are listed in the table below.
Enable Enable/Disable CDR API. The default setting is disabled.
Configure the IP address for TLS server to bind to. "0.0.0.0" means binding to all
TLS Bind Address
interfaces. The port number is optional and the default port number is 8443. The IP
address must match the common name (host name) in the certificate so that the TLS
socket won't bind to multiple IP addresses. The default setting is 0.0.0.0:8443.
TLS Private Key Upload TLS private key. The size of the key file must be under 2MB. This file will be
renamed as 'private.pem' automatically.
Upload TLS cert. The size of the certificate must be under 2MB. This is the certificate
TLS Cert
file (*.pem format only) for TLS connection. This file will be renamed as
"certificate.pem" automatically. It contains private key for the client and signed
certificate for the server.
Figure 230: CDR->Recording Files

Table 118: CDR API Configuration Files

UCM6510 IP PBX User Manual
P a g e | 332