Figure 82: Edit Customize Device Settings - Grandstream Networks UCM6510 User Manual

(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under web UI->PBX->Zero Config->Model Templates page. Please
see default model template option in
(4) Model Templates
Select a model template to be used for the device and click on
can be selected and users can arrange the priority by adjusting orders via
selected model templates will take effect. If the same option exists on multiple selected model
templates, the value in the template with higher priority will override the one in the template with
lower priority. Click on
(5) Customize Device Settings
This is the highest level configuration in the "Advanced" settings of the device. Click on "Modify
Customize Device Settings" and following dialog will show.
[Table 31: Create New Model Template]
to remove the model template from the selected list.

Figure 82: Edit Customize Device Settings

UCM6510 IP PBX User Manual
.
to add. Multiple global templates
and . All the
P a g e | 118