Firmware Version 1.0.10.39; Firmware Version 1.0.2.7 - Grandstream Networks UCM6510 User Manual

Firmware Version 1.0.10.39


Added multiple modes support for inbound route. [Inbound Route: Multiple Mode]

Added option "Enable Inbound Multiple Mode", "Inbound Default Mode" and "Inbound Mode 1" for
switching inbound route mode via feature code. [Feature Codes]

Added prepending prefix for inbound route. [Inbound Route: Prepend Example]

Added multiple registration per extension. [Multiple Registrations Per Extension]

Added SIP Message support. [SMS Message Support]

Added 100rel option for 100rel support. [Table 99: SIP Settings/ToS]

Added video preview support. [Table 89: Internal Options/Payload]

Added User Portal Page Fax sending support. [User Portal]

Added Fax intelligent routing. [Fax Intelligent Route]

Added Re-Invite with two media (audio, image) support for fax sending. [Fax with Two Media]

Added option "Max Concurrent Sending Fax" in Fax settings. [Configure Fax/T.38]

Added option "Fax Queue Length" in Fax settings. [Configure Fax/T.38]

Added Google Service Setting Support. [Google Service Settings Support]

Added Conference Schedule. [CONFERENCE SCHEDULE]

Added Setup Wizard. [Setup Wizard]

Added ability to customize specific prompt. [Customize Specific Prompt]

Added option "ALL" when making backup file. [Backup/Restore]

Added "Enable Destination" and "Default Destination" in Follow Me settings. [FOLLOW ME]

Added "Call Duration Limit" option in web UI->PBX->Internal Options->General. [Internal
Options/General]

Added "Enable Auto Email To User" option in web UI->PBX->Internal Options->General. [Internal
Options/General]

Added options "ICE Support" and "STUN Server" in web UI->PBX->Internal Options->RTP Settings.
[Internal Options/RTP Settings]

Added payload type setting for VP8 in web UI->PBX->Internal Options->Payload. [Internal
Options/Payload]

Added options "External Host" and "Use IP address in SDP" in web UI->PBX->SIP Settings->NAT. [SIP
Settings/NAT]

Improved CDR. [CDR Improvement]

Added Network Status page under web UI->Maintenance->Troubleshooting->Network Status [Network
Status]

Firmware Version 1.0.2.7


Added PRI T310 configuration [Table 49: Digital Hardware Configuration Parameters: E1 –
PRI_NET/PRI_CPE]

Added Announcement Center [Announcements Center]
UCM6510 IP PBX User Manual
P a g e | 25