Rule Name
Action
Type
Service
Firmware Version 1.0.7.11
Figure 12: Create New Firewall Rule
Table 15: Firewall Rule Settings
Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.
ACCEPT
REJECT
DROP
Select the traffic type.
IN
If selected, users will need specify the network interface "LAN" or "WAN"
(for UCM6102 only) for the incoming traffic.
OUT
Select the service type.
FTP
SSH
Telnet
TFTP
HTTP
LDAP
Custom
If "Custom" is selected, users will need specify Source (IP and port),
Destination (IP and port) and Protocol (TCP, UDP or Both) for the service.
Please note if the source or the destination field is left blank, it will be used
as "Anywhere".
UCM6100 Series IP PBX User Manual
Page 45 of 233