Login Settings; Figure 63: Login Timeout Settings - Grandstream Networks UCM6510 User Manual

Login Settings

After the user logs in the UCM6510 web UI, the user will be automatically logged out after certain timeout,
or he/she can be banned for a specific period if the login timeout is exceeded. Those values can be specified
under UCM6510 web GUI->Settings->Login Settings page.
The "User Login Timeout" value is in minute and the default setting is 10 minutes. If the user doesn't make
any operation on web UI within the timeout, the user will be logged out automatically. After that, the web UI
will be redirected to the login page and the user will need to enter username and password to log in.
If set to 0, there is no timeout for the web UI login session and the user will not be automatically logged out.
"User max number of try login" can prevent the UCM6510 from brutal force decryption, if this number is
exceeded user IP address will be banned from accessing the UCM for a period of time based on user
configuration, the default value is 5.
"User prevent login time" specify the period of time in minutes an IP will banned from accessing the UCM
if the User max number of try login is exceeded, the default value is 5.
"Login Banned User List" show the list of IP's banned from the UCM.
"Login White List" User can add a list of IP's to avoid the above restriction, thus, they can exceed the User
max number of try login

Figure 63: Login Timeout Settings

UCM6510 IP PBX User Manual
P a g e | 93