Table 16: Firewall Rule Settings; Figure 29: Create New Firewall Rule - Grandstream Networks UCM6100 Series User Manual

Rule Name Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.
•
Action
•
•
Select the traffic type.
•
Type
•
Select the service type.
•
•
•
•
•
Service
•
•

Figure 29: Create New Firewall Rule

Table 16: Firewall Rule Settings

ACCEPT
REJECT
DROP
IN
If selected, users will need specify the network interface "LAN" or "WAN"
(for UCM6100) for the incoming traffic.
OUT
FTP
SSH
Telnet
TFTP
HTTP
LDAP
Custom
If "Custom" is selected, users will need specify Source (IP and port),
Destination (IP and port) and Protocol (TCP, UDP or Both) for the service.
Please note if the source or the destination field is left blank, it will be used
as "Anywhere".
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 79