A preview of the "Advanced" settings is shown in the above figure. There are five levels configurations
as described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The configurations
in all levels will take effect for the device. If there are same options existing in different level
configurations with different value configured, the higher level configuration will override the lower level
configuration.
(1) Global Policy
This is the lowest level configuration. The global policy configured in web UI->PBX->Zero Config-
>Global Policy will be applied here. Clicking on "Modify Global Policy" to redirect to page PBX-
>Zero Config->Global Policy.
(2) Global Templates
Select a global template to be used for the device and click on
can be selected and users can arrange the priority by adjusting orders via
selected global templates will take effect. If the same option exists on multiple selected global
templates, the value in the template with higher priority will override the one in the template with
lower priority. Click on
Figure 81: Edit Device
to remove the global template from the selected list.
UCM6510 IP PBX User Manual
to add. Multiple global templates
and
. All the
P a g e
|
117