•
Ping Enable. Enable or disable ICMP response for Ping request. The default setting is Yes.
•
SYN Flood. Enable to prevent SYN Flood denial-of-service attack to the device.
•
Death-of-Ping. Enable to prevent Death-of-Ping attack to the device.
•
Create New Rule.
Click on "Create New Rule" button and a new window will pop up to specify rule options.
Rule Name
Specify the Firewall rule name.
Select the action for the Firewall to perform.
•
Action
•
•
Select the protocol for the traffic.
•
Protocol
•
•
Select the traffic type.
•
Type
•
Select the service type.
•
Service
•
•
Firmware Version 1.0.0.32
Figure 11: Create New Firewall Rule
Table 9: Firewall Rule Settings
ACCEPT
REJECT
DROP
TCP
UDP
Both
IN. If selected, users will need specify the interface for the incoming packets.
OUT
FTP
SSH
Telnet
UCM6102/6104/6108/6116 USER MANUAL
Page 26 of 108