Sample Configuration For Fax-To-Email; Figure 157: Create Fax Extension; Figure 158: Inbound Route To Fax Extension - Grandstream Networks UCM6510 User Manual

Sample Configuration for Fax-To-Email

The following instructions describe a sample configuration on how to use Fax-to-Email feature on the
UCM6510.
1. Connect PSTN line to the UCM6510 FXO port.
2. Go to UCM6510 web GUI->Internal Options->Fax/T.38 page. Create a new Fax extension.
3. Go to UCM6510 web GUI->Basic/Call Routes->Analog Trunks page. Create a new analog trunk with
"FAX Detection" set to "No".
4. Go to UCM6510 web GUI->Basic/Call Routes->Inbound Routes page. Create a new inbound route
and set the default destination to the Fax extension.

Figure 157: Create Fax Extension

Figure 158: Inbound Route to Fax Extension

UCM6510 IP PBX User Manual
P a g e | 250