Announcements Center; Announcements Center Setting; Table 100: Announcements Center Setting; Figure 184: Announcements Center - Grandstream Networks UCM6510 User Manual

Announcements Center

UCM6510 series supports Announcements Center features start from firmware 1.0.2.7. Announcements
Center allows user to previously record and store voice message into UCM6510 with a specified code, and
user can also create groups with specified extensions. When code and group number is dialed together,
the specified voice message is sent to all group members and only extensions in the group will hear the
voice message.
Note: The Announcements Center is used in the combination with code + group number.

Announcements Center Setting

Name
Code
Custom Prompt
Ring Timeout

Figure 184: Announcements Center

Table 100: Announcements Center Setting

Configure a name for the newly created Announcements Center, the name
can be anything.
Enter a code number for the customer prompt. This code is used in
combination with group number. For example, if the code is 55, and group
number is 666. User dial 55666 will send prompt 55 to all members in
group 666.
Note: the final number must not conflict with any number, like extensions
or conference number.
This option is for setting a custom prompt as an announcement to notify
group members. The file can be uploaded from page 'Custom Prompt'.
Click 'Prompt' to add additional record.
Configure the ring timeout for the group members. The default value is 30
seconds.
UCM6510 IP PBX User Manual
P a g e | 294