Once added, the option will be shown in the list below. On the left side of each option, users can click
on
to remove this option from the model template. On the right side of each option, users can click
on
to reset the option to the default value.
User could also click on "Add New Field" to add a P value number and the value to the configuration.
The following figure shows setting P value "P1362" to "en", which means the display language on the
LCD is set to English. For P value information of different models, please refer to configuration template
here http://www.grandstream.com/support/tools.
Click on Save when done. The model template will be displayed on web UI->PBX->Zero Config-
>Model Templates page.
Click on
to delete the model template or click on "Delete Selected Templates" to delete multiple
selected templates at once.
Click on "Toggle Selected Template(s)" to toggle the status between enabled/disabled for the selected
model templates.
Figure 76: Edit Model Template
UCM6510 IP PBX User Manual
P a g e
|
113