Paging And Intercom Group; Configure Paging/Intercom Group; Table 76: Paging/Intercom Group Configuration Parameters; Figure 141: Paging/Intercom Group - Grandstream Networks UCM6510 User Manual

Paging and Intercom Group can be used to make an announcement over the speaker on a group of phones.
Targeted phones will not ring but answer immediately using speaker. The UCM6510 paging and intercom
can be used via feature code to a single extension or a paging/intercom group. This sections describes the
configuration of paging/intercom group under web GUI->PBX->Call Features->Paging/Intercom.

Configure Paging/Intercom Group


Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Name
Extension
Type
Custom Prompt
Page/Intercom Group
Members

Click on to edit the paging/intercom group.

PAGING AND INTERCOM GROUP

Figure 141: Paging/Intercom Group

Table 76: Paging/Intercom Group Configuration Parameters

Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
This option is setting a custom prompt used as announcement placed to
the person receiving a paging/internal call. The file can be uploaded from
the web GUI->Internal Options->Custom Prompt, or click the 'Prompt' to
add additional recorded.
Select available users from the left side to the paging/intercom group
member list on the right.
UCM6510 IP PBX User Manual
P a g e | 233