Prepend
Time Condition
Time Condition
Country Codes
The UCM6510 allows users to put country code restrictions on specific outbound routes. Once the restriction is
enabled, call to the restricted country cannot be placed on that specific trunk. To configure this feature, please
navigate to web UI-> PBX -> Basic -> Outbound Routes -> Country Codes.
Inbound Routes
Inbound routes can be configured via web GUI->PBX->Basic/Call Routes->Inbound Routes.
Click on "Create New Inbound Rule" button to add a new inbound route.
Click on "Blacklist" button to configure blacklist for all inbound routes.
Click on
to edit the inbound route.
Click on
to delete the inbound route.
Specify the digits to be prepended before the call is placed via the trunk.
Those digits will be prepended after the dialing number is stripped.
Users could customize holiday time, office time or a specified time to allow
the outbound route to be used.
Figure 118: Country Codes
UCM6510 IP PBX User Manual
P a g e
|
197