Grandstream Networks UCM6510 User Manual page 140

CallerID Number
Permission
Enable Voicemail
Voicemail Password
Skip Voicemail Password
Verification
Disable This Extension
User Settings
First Name
Last Name
Email Address
User Password
Language
Configure the CallerID Number that would be applied for outbound calls
from this user.
Note: The ability to manipulate your outbound Caller ID may be limited by
your VoIP provider.
Assign permission level to the user. The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls using this rule.
Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the
voicemail box. A random numeric password is automatically generated. It
is recommended to use the random generated password for security
purpose.
When user dials voicemail code, the password verification IVR is skipped.
If enabled, this would allow one-button voicemail access. By default this
option is disabled.
If selected, this extension will be disabled on the UCM6510.
Note: The disabled extension still exists on the PBX but can't be used on
the end device.
Configure the first name of the user. The first name can contain characters,
letters, digits and _.
Configure the last name of the user. The last name can contain characters,
letters, digits and _.
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
Configure the password for user portal access. A random numeric
password is automatically generated. It is recommended to use the
randomly generated password for security purpose.
Select the voice prompt language to be used for this extension. The default
setting is "Default" which is the selected voice prompt language under web
GUI->PBX->Internal Options->Language. The dropdown list shows all
the current available voice prompt languages on the UCM6510. To add
more languages in the list, please download voice prompt package by
selecting "Check Prompt List" under web UI->PBX->Internal Options-
>Language.
UCM6510 IP PBX User Manual
P a g e | 139