Rule Name
Action
Type
Service
Save the change and click on "Apply" button. Then submit the configuration by clicking on "Apply Changes"
on the upper right of the web page. The new rule will be listed at the bottom of the page with sequence
Firmware Version 1.0.1.22
Figure 11: Create New Firewall Rule
Table 14: Firewall Rule Settings
Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.
•
ACCEPT
•
REJECT
•
DROP
Select the traffic type.
•
IN
If selected, users will need specify the network interface "LAN" or "WAN"
(for UCM6102 only) for the incoming traffic.
•
OUT
Select the service type.
•
FTP
•
SSH
•
Telnet
•
TFTP
•
HTTP
•
LDAP
•
Custom
If selected, users will need specify Source (IP and port), Destination (IP
and port) and Protocol (TCP, UDP or Both) for the service.
UCM6102/6104/6108/6116 USER MANUAL
Page 32 of 138