Table 13: Ucm6510 Firewall->Static Defense->Current Service; Table 14: Typical Firewall Settings - Grandstream Networks UCM6510 User Manual

The following table shows a sample current service status running on the UCM6510.
Port
7777
389
22
80
8089
69
9090
6060
5060
4569
5353
37435
For typical firewall settings, users could configure the following options on the UCM6510.
If enabled, ICMP response will not be allowed for Ping request. The default
Ping Defense
setting is disabled. To enable or disable it, click on the check box for the LAN or
Enable
WAN interface.
Enable to prevent Ping-of-Death attack to the device. The default setting is
Ping-of-Death
disabled. To enable or disable it, click on the check box for the LAN or WAN
Defense Enable
interface.
Under "Custom Firewall Settings", users could create new rules to accept, reject or drop certain traffic going
through the UCM6510. To create new rule, click on "Create New Rule" button and a new window will pop
up for users to specify rule options.
The following figure shows a firewall rule example that will deny SSH access for the UCM6510 from WAN
side.
Table 13: UCM6510 Firewall->Static Defense->Current Service
Process
Asterisk
Slapd
Dropbear
Lighthttpd
Lighthttpd
Opentftpd
Asterisk
zero_config
Asterisk
Asterisk
zero_config
Syslogd

Table 14: Typical Firewall Settings

UCM6510 IP PBX User Manual
Type
TCP/IPv4
TCP/IPv4
TCP/IPv4
TCP/IPv4
TCP/IPv4
UDP/IPv4
UDP/IPv4
UDP/IPv4
UDP/IPv4
UDP/IPv4
UDP/IPv4
UDP/IPv4
P a g e | 70