The following figure shows a firewall rule example that will deny SSH access for the UCM6510 from WAN
side.
Rule Name
Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.
•
Action
•
•
Select the traffic type.
•
Type
•
Select the service type.
•
•
•
•
•
Service
•
•
Figure 36: Create New Firewall Rule
Table 15: Firewall Rule Settings
ACCEPT
REJECT
DROP
IN
If selected, users will need specify the network interface "LAN", "WAN" or
"Both" for the incoming traffic.
OUT
FTP
SSH
Telnet
TFTP
HTTP
LDAP
Custom
If selected, users will need specify Source (IP and port), Destination (IP and
port) and Protocol (TCP, UDP or Both) for the service. Please note if the
source or the destination field is left blank, it will be used as "Anywhere".
UCM6510 IP PBX User Manual
P a g e
|
71