Batch Add Extensions; Batch Add Sip Extensions; Table 43: Fxs Extension Configuration Parameters - Specific Time - Grandstream Networks UCM6510 User Manual

Auto Record
Skip Trunk Auth
Time Condition for Skip
Trunk Auth
Dial Trunk Password
Enable LDAP
Music On Hold
Call Duration Limit
Table 43: FXS Extension Configuration Parameters – Specific Time
Specific Time
Time Condition

Batch Add Extensions

Batch Add SIP Extensions

In order to add multiple SIP extensions, BATCH add can be used to create standardized SIP extension
accounts. However, unique extension user name can't be set using BATCH add.
Under web GUI->PBX->Basic/Call Routes->Extensions, click on "Batch Add Extensions"->"Batch Add
SIP Extensions".
range is between 5 seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout
used is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default
setting is disabled. The recording files can be accessed under web GUI-
>CDR->Recording Files.

If set to "Yes", users can skip entering the password when making
outbound calls.

If set to "By Time", users can skip entering the password when making
outbound calls during the selected time condition.

If set to "No", users will be asked to enter the password when making
outbound calls.
If "Skip Trunk Auth" is set to "By Time", select a time condition during which
users can skip entering password when making outbound calls.
Configure personal password when making outbound calls via trunk.
If enabled, this extension will be added to LDAP Phonebook PBX list; if
disabled, this extension will be skipped when creating LDAP Phonebook.
Select which Music On Hold class to suggest to extension when putting
the active call on hold.
Configure the maximum duration of call-blocking.
Click to add Time Condition to configure specific time for this extension.
UCM6510 IP PBX User Manual
P a g e | 143