Table 79: Follow Me Settings - Grandstream Networks UCM6510 User Manual

3. Click on "Add Follow Me Number" to add local extensions or external numbers to be called after ringing
the extension selected in the first step.
4. Once created, it will be displayed on the follow me web page list. Click on
configuration. Click on
The following table shows the Follow Me configuration parameters.
Enable
Skip Trunk Auth
Music On Hold Class
Confirm When Answering
Enable Destination
Default Destination
Follow Me Numbers
New Follow Me Number
Dialing Order
to delete the Follow Me.

Table 79: Follow Me Settings

Configure to enable or disable Follow Me for this user.
If external number is added in the Follow Me, please make sure this option
is enabled or the "Skip Trunk Auth" option of the extension is enabled,
otherwise the external Follow Me number cannot be reached.
Configure the Music On Hold class that the caller would hear while tracking
the user.
By default, it is enabled and user will be asked to press 1 to accept the call
or to press 2 to reject the call after answering a Follow Me call.
If it is disabled, the Follow Me call will be established once after the user
answers it.
If enabled, the call will be routed to the default destination if no one in the
Follow Me answers the call.
Configure the destination if no one in the Follow Me answers the call,
available options are:

Extension

Voicemail

Queues

Ring Group

Voicemail Group

IVR

External Number
The added numbers are listed here. Click on
Click on to delete the number. Click on
Add a new Follow Me number which could be a 'Local Extension' or
'External Number'. The selected dial plan should have permissions to dial
the defined external number.
Select the order in which the Follow Me destinations will be dialed to reach
the user: ring all at once or ring one after the other.
UCM6510 IP PBX User Manual
to edit the Follow Me
to arrange the order.
to add new numbers.
P a g e | 254