Table 26: Global Policy Parameters - Contact List - Grandstream Networks UCM6510 User Manual

LDAP Phonebook
Source
Address
Port
Base DN
User Name
Password
Number Filter
Name Filter
Version
Name Attribute
Number Attribute
Display Name
Max Hits
Table 26: Global Policy Parameters – Contact List
Select "Manual" or "PBX" as the LDAP configuration source.

If "Manual" is selected, the LDAP configuration below will be applied to
the SIP end device.

If "PBX" is selected, the LDAP configuration built-in from UCM6510
web UI->Settings->LDAP Server will be applied.
Configure the IP address or DNS name of the LDAP server.
Configure the LDAP server port. The default value is 389.
This is the location in the directory where the search is requested to begin.
Example:

dc=grandstream, dc=com

ou=Boston, dc=grandstream, dc=com
Configure the bind "Username" for querying LDAP servers. The field can
be left blank if the LDAP server allows anonymous binds.
Configure the bind "Password" for querying LDAP servers. The field can be
left blank if the LDAP server allows anonymous binds.
Configure the filter used for number lookups. Please refer to user manual
for more details.
Configure the filter used for name lookups. Please refer to user manual for
more details.
Select the protocol version for the phone to send the bind requests. The
default value is 3.
Specify the "name" attributes of each record which are returned in the
LDAP search result.
Example:

gn

cn sn description
Specify the "number" attributes of each record which are returned in the
LDAP search result.
Example:

telephoneNumber

telephoneNumber Mobile
Configure the entry information to be shown on phone's LCD. Up to 3 fields
can be displayed.
Example:

%cn %sn %telephoneNumber
Specify the maximum number of results to be returned by the LDAP server.
Valid range is 1 to 3000. The default value is 50.
UCM6510 IP PBX User Manual
P a g e | 105