Access Voicemail; Table 72: Voicemail Ivr Menu - Grandstream Networks UCM6510 User Manual

Announce Message Caller-ID
Announce Message Duration
Play Envelope
Play from Last
Allow User Review

Access Voicemail

If the voicemail is enabled for UCM6510 extensions, the users can dial the voicemail access feature code
(by default *98 or *97) to access the extension's voicemail. The users will be prompt to enter the voicemail
password and then can enter digits from the phone keypad to navigate in the IVR menu for different options.
Main Menu Sub Menu 1
3 - Advanced options
1 - New
5 - Repeat the current message
messages
7 - Delete this message
8 - Forward the message to another user
9 – Save
* - Help
# - Exit
0 - New messages
1 - Old messages
2 - Change
folders
2 - Work messages
3 - Family messages
If enabled, the caller ID of the user who has left the message will be
announced at the beginning of the voicemail message. The default setting
is "No".
If enabled, the message duration will be announced at the beginning of the
voicemail message. The default setting is "No".
If enabled, a brief introduction (received time, received from, and etc) of
each message will be played when accessed from the voicemail
application. The default setting is "Yes".
If enabled, UCM6510 will play from the voice message left most recently; if
disabled, UCM6510 will play from the earliest left voice message
If enabled, users can review the message following the IVR before sending
the message out. The default setting is "No".

Table 72: Voicemail IVR Menu

UCM6510 IP PBX User Manual
Sub Menu 2
1 - Send a reply
2 - Call the person who sent this message
3 - Hear the message envelop
4 - Leave a message
* - Return to the main menu
P a g e | 224