Fax/T.38; Configure Fax/T.38; Table 78: Fax/T.38 Settings - Grandstream Networks UCM6510 User Manual

The UCM6510 supports T.30/T.38 Fax and Fax Pass-through. It can also convert the received Fax to PDF
format and send it to the configured Email address. Fax/T.38 settings can be accessed via web GUI->PBX-
>Internal Options->FAX/T.38.

Configure Fax/T.38


Click on "Create New Fax Extension". In the popped up window, fill the extension, name and Email
address to send the received Fax to.

Click on "Fax Settings" to configure the Fax parameters.
Enable Error Correction
Mode
Maximum Transfer Rate
Minimum Transfer Rate
Max Concurrent Sending Fax
Fax Queue Length
Default Email Address
Template Variables

FAX/T.38

Table 78: FAX/T.38 Settings

Configure to enable Error Correction Mode (ECM) for the Fax. The default
setting is "Yes".
Configure the maximum transfer rate during the Fax rate negotiation. The
possible values are 2400, 4800, 7200, 9600, 12000 and 14400. The default
setting is 14400.
Configure the minimum transfer rate during the Fax rate negotiation. The
possible values are 2400, 4800, 7200, 9600, 12000 and 14000. The default
setting is 2400.
Configure the concurrent fax that can be sent by UCM6510.

Only mode supports single user fax sending

More mode supports multiple concurrent fax sending
By default, this option is set to "only".
Configure the maximum length of Fax Queue.
Configure the Email address to send the received Fax to if user's Email
address cannot be found.
Note:
The extension's Email address or the Fax's default Email address needs to
be configured in order to receive Fax from Email. If neither of them is
configured, Fax will be not be received from Email.
Fill in the "Subject:" and "Message:" content, to be used in the Email when
sending the Fax to the users.
The template variables are:
UCM6510 IP PBX User Manual
P a g e | 246