Fax Intelligent Route; Fax With Two Media; Blacklist Configurations - Grandstream Networks UCM6510 User Manual

For example, the customer service hotline destination has to be set to a different IVR after 7PM. The user can
dial *62 to switch to "Mode 1" with that IVR set as the destination before off work.

Fax Intelligent Route

The UCM6510 can automatically detect Fax and phone signal coming from the FXO port, and then forward Fax
or phone signal to the right destination. For example, when a regular phone call is coming, the UCM65100 will be
able to detect the phone signal and forward it through the correct inbound route to the destination; if Fax signal is
coming, the UCM6510 will be able to forward it to the FXS extension where the Fax machine is connected.

Fax with Two Media

UCM6510 with Asterisk 13 system now supports fax re-invite with multiple codec negotiation. If a fax re-invite
contains both T.38 and PCMA/PCMU codec, UCM6510 will choose T.38 codec over PCMA/PCMU. Where in the
old Asterisk 1.8 system, multiple codec in the re-invite is prohibited and will be dropped by UCM6510.

Blacklist Configurations

In the UCM6510, Blacklist is supported for all inbound routes. Users could enable the Blacklist feature and
manage the Blacklist by clicking on "Blacklist".

Select the checkbox for "Blacklist Enable" to turn on Blacklist feature for all inbound routes. Blacklist is
disabled by default.

Enter a number in "Add Blacklist Number" field and then click
also be added as a Blacklist Number.

To remove a number from the Blacklist, select the number in "Blacklist list" and click on
UCM6510 IP PBX User Manual
to add to the list. Anonymous can
.
P a g e | 203