Table 17: Firewall Rule Settings; Figure 35: Create New Firewall Rule - Grandstream Networks UCM6100 Series User Manual

Rule Name
Action
Type
Service
Save the change and click on "Apply" button. Then submit the configuration by clicking on "Apply
Changes" on the upper right of the web page. The new rule will be listed at the bottom of the page with
sequence number, rule name, action, protocol, type, source, destination and operation. More operations
below:
Firmware Version 1.0.10.39

Figure 35: Create New Firewall Rule

Table 17: Firewall Rule Settings

Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.

ACCEPT

REJECT

DROP
Select the traffic type.

IN
If selected, users will need specify the network interface "LAN" or "WAN"
(for UCM6102 only) for the incoming traffic.

OUT
Select the service type.

FTP

SSH

Telnet

TFTP

HTTP

LDAP

Custom
If "Custom" is selected, users will need specify Source (IP and port),
Destination (IP and port) and Protocol (TCP, UDP or Both) for the service.
Please note if the source or the destination field is left blank, it will be used
as "Anywhere".
UCM6100 Series IP PBX User Manual Page 72 of 331