Grandstream Networks UCM6510 User Manual page 55
Ip pbx
Hide thumbs
Also See for UCM6510:
- User manual (483 pages) ,
- Basic configuration manual (30 pages) ,
- Quick installation manual (21 pages)
Table of Contents
Advertisement
WAN (when "Method" is set to "Route")
IP Method
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the subnet mask address for static IP settings. The default setting is
Subnet Mask
255.255.0.0.
Gateway IP
Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
DNS Server 1
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
Layer 2 QoS
Assign the VLAN tag of the layer 2 QoS packets for WAN port.
802.1Q/VLAN Tag
The default value is 0.
Layer 2 QoS 802.1p
Assign the priority value of the layer 2 QoS packets for WAN port.
The default value is 0.
Priority Value
LAN (when Method is set to "Route")
IP Address
Enter the IP address assigned to LAN port. The default setting is 192.168.2.1.
Subnet Mask
Enter the subnet mask. The default setting is 255.255.255.0.
DHCP Server Enable
Enable or disable DHCP server capability. The default setting is "Yes".
DNS Server 1
Enter DNS server address 1. The default setting is 8.8.8.8.
DNS Server 2
Enter DNS server address 2. The default setting is 208.67.222.222.
Allow IP Address
Enter the DHCP IP Pool starting address. The default setting is 192.168.2.100.
From
Enter the DHCP IP Pool ending address. The default setting is 192.168.2.254.
Allow IP Address To
Default IP Lease
Enter the IP lease time (in seconds). The default setting is 43200.
Time
LAN (when Method is set to "Switch")
IP Method
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the subnet mask address for static IP settings.
Subnet Mask
The default setting is 255.255.0.0.
Enter the gateway IP address for static IP settings.
Gateway IP
The default setting is 0.0.0.0.
Enter the DNS server 1 address for static IP settings.
DNS Server 1
The default setting is 0.0.0.0.
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
UCM6510 IP PBX User Manual
P a g e
|
54
Advertisement
Table of Contents
Troubleshooting
