Table 10: Firewall Rule Settings; Figure 6: Create New Firewall Rule - Grandstream Networks UCM6510 User Manual

Rule Name
Action
Type
Service
Save the change and click on "Apply" button. Then submit the configuration by clicking on "Apply Changes"
on the upper right of the web page. The new rule will be listed at the bottom of the page with sequence
number, rule name, action, protocol, type, source, destination and operation. Users can click on
the rule, or select to delete the rule.
Firmware Version 1.0.0.5

Figure 6: Create New Firewall Rule

Table 10: Firewall Rule Settings

Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.

ACCEPT

REJECT

DROP
Select the traffic type.

IN
If selected, users will need specify the network interface "LAN", "WAN" or
"Both" for the incoming traffic.

OUT
Select the service type.

FTP

SSH

Telnet

TFTP

HTTP

LDAP

Custom
If selected, users will need specify Source (IP and port), Destination (IP
and port) and Protocol (TCP, UDP or Both) for the service.
UCM6510 IP PBX User Manual
to edit
Page 32 of 192