-------------------------------------------------------------------------------------------- ------------------------------------------------
Note:
Syslog is usually for debugging and troubleshooting purpose. Turning on all levels for all syslog modules is
not recommended for daily usage. Too many syslog print might cause traffic and affect system performance.
--------------------------------------------------------------------------------------------------------------------- -----------------------
Troubleshooting
On the UCM6510, users could capture traces, ping remote host and traceroute remote host for
troubleshooting purpose under web GUI->Maintenance->Troubleshooting.
Ethernet Capture
The captured trace can be downloaded for analysis. Also the instructions or result will be displayed in the
web GUI output result.
Interface Type
Enable SFTP Data Sync
Storage to External Device
Figure 243: Ethernet Capture
Table 123: Ethernet Capture
Select the network interface to monitor.
Check this box to save the capture files in the SFTP server. Please
make sure the configuration of data synchronization works before.
Check this box to activate storage of the capture either on the USB
or SD Card.
UCM6510 IP PBX User Manual
P a g e
|
345