Table 42: Fxs Extension Configuration Parameters - Features - Grandstream Networks UCM6510 User Manual

Table 42: FXS Extension Configuration Parameters – Features
Call Transfer
Call Forward Unconditional
CFU Time Condition
Call Forward No Answer
CFN Time Condition
Call Forward Busy
Fax setting page under web UI->PBX->Internal Options->Fax/T.38.

Fax Gateway: If selected, the UCM6510 can support conversation
and processing of Fax data from T.30 to T.38 or T.38 to T.30. This
feature is only available for FXS or FXO port.
Configure the Call Forward Unconditional target number. If not configured,
the Call Forward Unconditional feature is deactivated. The default setting
is deactivated.
Select time condition for Call Forward Unconditional. CFU takes effect only
during the selected time condition. The available time conditions are
"Office Time", "Out of Office Time", "Holiday", "Out of Holiday", "Out of
Office Time or Holiday" and "Specific".
Note:

"Specific" has higher priority to "Office Times" if there is a conflict in
terms of time period.

Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.

Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
Select time condition for Call Forward No Answer. The available time
conditions are "Office Time", "Out of Office Time", "Holiday", "Out of
Holiday", "Out of Office Time or Holiday" and "Specific".
Note:

"Specific" has higher priority to "Office Times" if there is a conflict in
terms of time period.

Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.

Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
UCM6510 IP PBX User Manual
P a g e | 141