Table 14: Firewall Rule Settings; Figure 11: Create New Firewall Rule - Grandstream Networks UCM6100 Series User Manual

Rule Name
Action
Type
Service
Save the change and click on "Apply" button. Then submit the configuration by clicking on "Apply Changes"
on the upper right of the web page. The new rule will be listed at the bottom of the page with sequence
number, rule name, action, protocol, type, source, destination and operation. Users can click on
the rule, or select to delete the rule.
Firmware Version 1.0.5.19

Figure 11: Create New Firewall Rule

Table 14: Firewall Rule Settings

Specify the Firewall rule name to identify the firewall rule.
Select the action for the Firewall to perform.

ACCEPT

REJECT

DROP
Select the traffic type.

IN
If selected, users will need specify the network interface "LAN" or "WAN"
(for UCM6102 only) for the incoming traffic.

OUT
Select the service type.

FTP

SSH

Telnet

TFTP

HTTP

LDAP

Custom
If selected, users will need specify Source (IP and port), Destination (IP
and port) and Protocol (TCP, UDP or Both) for the service.
UCM6100 Series IP PBX User Manual
to edit
Page 39 of 183