Group Setting; Table 101: Group Setting; Figure 185: Announcements Center Group Configuration - Grandstream Networks UCM6510 User Manual

Group Setting

Name
Number
Announcements Center feature can be found under web UI-> PBX-> Value-added Features->
Announcements Center. The following example demonstrates the usage of this feature.
1. Click
2. Give a name for the newly created group, and the Number is used later with code to send voice
message.
3. Select the extensions that want to be included in the group.
In this example, Group Test has number 666, and extension 1000, 1001 and 1002 is in the current group.
4. Click
5. Give a name for the newly created Announcements Center, and the Code is used to specifiy the
message that will be sent to the group.
6. Select the message that will be used by the code from the Custom Prompt drop down menu. To
create a new Prompt, please click Prompt and follow the instruction.

Table 101: Group Setting

Configure a name for the newly created group, the name can be anything.
Configure the group number. The group number is used in combination
with code. For example, if group number is 666, and code is 55. User dials
55666 will send prompt 55 to all members in group 666.
Note: The group number must not conflict with any other numbers, such
as extension or conference number.
to create new group.

Figure 185: Announcements Center Group Configuration

UCM6510 IP PBX User Manual
to create a new Announcement Center.
P a g e | 295