Frequency Display - R&S EB200 Manual

EB200 Manual Operation
Menu names
On the right-hand side of the screen above the softkey bar, there is a window for the name or
designation of the menu that is currently activated. The menu name always corresponds to the
designation of the softkey that was used to activate the menu. If you are in a second or third level
submenu, the names of the menus above are displayed above the menu name window.

3.3.1 Frequency display

The frequency display can be presented in different sizes but always at the same position in the
working area of the display. When the IF-panorama option has been activated, the small frequency
display is automatically selected.
All frequencies are displayed in MHz without a unit as standard; the step frequency is displayed in kHz
with a unit.
The receive frequency is always displayed with six places after the decimal point.
The start and stop frequencies are displayed with only three places after the decimal point.
To make the numbers easier to read, their digits are marked off in groups of three.
4052.2000.02 3.7 E-7