Operation; Description Of The Front Panel; Fig. 3-1: Front View - R&S EB200 Manual

EB200 Manual

3 Operation

3.1 Description of the front panel

Fig. 3-1: Front view

Table 3-1: Controls and displays
Item. Designation
1 N-connector
2 BW
3 MOD
4 MGC
5 SQU
6 TONE
7 VAR pot
8 Volume control
9 Spinwheel
10 LOCK
11 FRQ
12 MEM
13 SEL
14 Decimal keypad
15 ESC
4052.2000.02
Function
Antenna connection
Bandwidth selection
Selection of modulation mode FM, AM, PULSE, CW, USB, LSB or IQ
Switches MGC function on or off. Adjustments with potentiometer (7).
Switches the squelch function on or off. Adjustments with potentiometer (7).
Switches the tone function on or off. Adjustments with potentiometer (7).
Potentiometer for adjusting the values of MGC, SQU and TONE.
Volume control for headphones, loudspeaker and loudspeaker-output on the rear
panel
Selects frequency, memory location or configuration parameters
Key for enabling or disabling the spinwheel function
Key for entering receive frequencies
Key for selecting the memory location number (0 to 999)
For selecting parameters in the configuration menu
For entering values into the editor, keys 0 to 9, decimal point and storage in the
current selection with the ENT key. With the keys FRQ, MEM, MGC, SQU and
TONE, the value is taken from the editor and stored directly.
Closes editor or temporary window or for moving a level upwards in the menu tree.
3.1
Operation
E-7