Memory Subsystem - R&S EB200 Manual

EB200 Manual

4.5.11 MEMory subsystem

This subsystem contains all the functions necessary to operate the EB200 memory locations. The
memory locations are addressed with the text (see "Parameters" on page 9) MEM0 to MEM999 (memory
location 0 to memory location 999). Some commands allow the receiver (data set of receiver settings)
to be addressed by Character Data RX, the currently set memory location by CURRENT and the
next free memory location by NEXT .
The number of the currently active memory location can also be queried by the MSCAN:CHAnel?
command.
MEMory
. :CLEar <name> [,<count>|MAXimum]
Clearing the contents of a memory location. A certain number of memory locations to be cleared may
also be specified.
Parameters
<name>
<count>
MAXimum
Example:
MEMory:CLEar MEM123
. :COPY <src_name>, <dest_name>
Copy the memory contents from src to dest
Parameters:
<src_name>|RX
<dest_name>|RX
Example:
MEMory:COPY MEM123, MEM10
4052.2000.02
MEM0 to MEM999
| CURRENT
number of memory locations to be cleared from memory location
<name>; as a default value <count> = 1 is accepted
clearing all memory locations from <name> to the last memory
location
MEM0 to MEM999 |RX | CURRENT
MEM0 to MEM999 |RX | CURRENT|NEXT
4.42
MEMory subsystem
E-7