R&S EB200 Manual page 117

EB200 Manual
. :CONTents <name>,<mem_paras>|<packed_struct>
Loading a memory location
As an alternative to the parameter field (<mem_paras>) a <Definite Length Block> can be
transferred with binary data.
Parameters:
<name>
<mem_paras>
<F>
<THR>
<DEM>
<BW>
<ANT>
<ATT>
<ATTA>
<SQUC>
<AFC>
<ACT>
<packed_struct>
Frequency in Hz
Squelch threshold in 1/10 dBuV
Demodulation type
Bandwidth
Antenna number
Attenuator
Attenuator auto
Squelch function
AFC function
Set/Reset memory
--------------------------------------------------------------------------
Total number of bytes = 16
Notes:
•
When loading the receiver data set (RX) the parameter <ACT> is ignored. It must, however, be
specified.
•
When loading with <packed_struct> the byte order within the 2- and 4-byte elements is
determined by the setting command FORMat:BORDer.
*RST state:
The contents of the memory locations is kept after *RST.
Example:
MEMory:CONTents
4052.2000.02
MEM0 to MEM999 | RX | CURRENT | NEXT
<F>, <THR>, <DEM>, <BW>, <ANT>, <ATT>,
<SQUC>, <AFC>,<ACT>
frequency (see SENS:FREQ:CW)
squelch threshold (see OUTP:SQU:THR)
type of demodulation (see SENS:DEM)
bandwidth (see SENS:BWID)
antenna number (see ROUT:SEL)
attenuator (see INP:ATT:STAT)
attenuator auto (see INP:ATT:AUTO)
squelch function (see OUTP:SQU:STAT)
AFC function (see (SENS:FREQ:CW:AFC)
setting/resetting the memory to scan (ON/OFF or
1/0)
binary data set as <Definite Length Block> with the
following structure:
4 bytes = unsigned long integer
2 bytes = signed integer
2 bytes = meaning:
0 = FM, 1 = AM, 2 = PULSe, 3 = CW, 4 = USB, 5 = LSB, 6 =
IQ
2 bytes = meaning:
0 = 0.15 kHz, 1 = 0.3 kHz, 2 = 0.6 kHz, 3 = 1.5 kHz,
4 = 2.4 kHz, 5 = 6 kHz, 6 = 9 kHz, 7 = 15 kHz, 8 = 30 kHz,
9 = 50 kHz, 10 = 120 kHz, 11 = 150 kHz,
1 byte = unsigned character 0 to 99
1 byte = unsigned character (1 = on / 0 = off)
1 byte = unsigned character (1 = on / 0 = off)
1 byte = unsigned character (1 = on / 0 = off)
1 byte = unsigned character (1 = on / 0 = off)
1 byte = unsigned character (1 = set / 0 = reset)
MEM1,98.5 MHz,34, FM ,100 kHz,(@1),1,OFF,ON,OFF,ON
4.43
MEMory subsystem
<ATTA>,
E-7