Ifpan - R&S EB200 Manual

EB200 Manual
. . :SPAN<numeric_value>|UP|DOWN |MINimum|MAXimum
Selection of frequency range with option IF panorama.
The following ranges are available in addition to the IF bandwidths: 25, 50, 100, 200, 500, 1000 kHz. If
a frequency range is entered it will be brought up to the next higher range.
Parameters:
<numeric_value>
UP|DOWN
MINimum|MAXimum
*RST state:
1000 kHz
Example:
FREQuency:SPAN 25 kHz
. . :SPAN? [MINimum|MAXimum]
Query of frequency range with option IF panorama.
Parameters:
none
MINimum|MAXimum
Result:
Frequency value Hz
Example:
FREQuency:SPAN? → 25000
. . :STARt <numeric_value>|MINimum|MAXimum
Setting of start frequency of a frequency scan
Parameters:
<numeric_value>
MINimum|MAXimum
*RST state:
20 MHz
Example:
FREQuency:STARt 118 MHz
4052.2000.02
frequency range
taking the range after|before the current bandwidth
setting the minimum|maximum frequency range
query of current frequency range
query of minimum|maximum frequency range
frequency
setting the lowest|highest start frequency
4.72
SENSe subsystem FREQuency
E-7