Changing The Display - R&S ESR Getting Started

®
R&S ESR
Particularities in Windows dialog boxes
In some cases, e.g. if you want to install a printer, original Windows dialog boxes
are used. In these dialog boxes, the navigation behavior is different to the one
you are used to from R&S ESR applications. In the following, the important differ-
ences and useful tips are listed:
● The rotary knob and function keys do not work. Do not use them. Use the
touchscreen instead.
6.4

Changing the Display

6.4.1 Changing the Focus
Any selected function is always performed on the currently focussed element in
the display, e.g. a dialog field, diagram, or table row. Which element is focussed is
indicated by a blue frame (diagram, window, table) or is otherwise highlighted
(softkey, marker etc.). Moving the focus is most easily done by tapping on the ele-
ment on the touchscreen. Alternatively, use the "Tab" key on the on-screen key-
board or the rotary knob to move the focus from one element to the next on the
display.
To move the focus on the screen between any displayed diagrams or tables,
press the "Change focus" function key on the front panel. The focus moves from
the diagram to the first table to the next table etc. and then back to the diagram.
6.4.2 Switching between Split and Maximized Display
Press the [SPLIT/MAXIMIZE] key on the front panel to switch between a split
screen and a full screen (maximized display). In maximized display, the table or
diagram currently focused is maximized. In split display, both the diagram and
any available tables are displayed in one screen.
Getting Started 1316.3749.02 ─ 09
In some measurement modes, a table with markers or measurement
results is displayed beneath the diagram. In this case, you may wish to
maximize the diagram or table display in order to see more details.
Basic Operations
Changing the Display
69