R&S EB200 Manual page 135

EB200 Manual
. :DEModulation AM|FM| PULSe|A1|CW|LSB|USB|IQ|A0
Switchover of type of demodulation
Note:
For SSB demodulation (CW, LSB and USB,) the frequency stepwidth is set to 1 Hz..
Error message:
If the set bandwidth exceeds 9 kHz at CW, LSB and USB, an error -221,"Settings conflict" will
be generated if one of the SSB operating modes is to be switched on.
Parameters:
FM
AM
PULSe
CW or A1
USB
LSB
IQ or A0
*RST state:
FM
Example:
DEModulation FM
. :DEModulation?
Query of demodulation type
Parameters:
none
Result:
FM, AM, PULSe, CW, USB, LSB, IQ
Example:
DEModulation? -> FM
4052.2000.02
switch on FM demodulator
switch on AM demodulator
switch on pulse demodulator
switch on SSB demodulator 1 kHz beat
switch on SSB demodulator upper sideband
switch on SSB demodulator lower sideband
switch on IQ demodulator
4.61
SENSe subsystem DEModulation
E-7