R&S EB200 Manual page 123

EB200 Manual
. . [:STATe]?
Query of squelch setting
Parameters:
none
Result:
1
0
State:
OUTPut:SQUelch? -> 1
. . :CONTrol MEMory|NONE
Selection of the source for the operating state after switching the unit on, when reading the memory
locations by the MEMory:COPY command, when using the RCL key or when running memory scan.
Parameters:
MEMory
NONE
*RST state
MEMory
Example:
OUTPut:SQUelch:CONTrol
. . :CONTrol?
Query of the source of squelch setting when reading memory locations
Parameters:
none
Result:
MEM, NONE
Example:
OUTPut : SQUelch : CONTrol? → MEM
4052.2000.02
squelch on
squelch off
squelch state and squelch value are read out of the memory
locations
squelch state and squelch value are not read out of the memory
locations
NONE
4.49
OUTPut subsystem
E-7