Table of Contents
Advertisement
EB200 Manual
4.7.3.8 STATus:EXTension register
This register contains in the CONDition part information on different receiver states which cannot be
assigned to the other registers. Information about the actions the unit had carried out since the last read
out is stored in the EVENt part. The corresponding registers can be queried with the commands
STATus:EXTension:CONDition? or STATus:EXTension[:EVENt]? .
Table 4-10 Bit allocation of STATus:EXTension register
Bit No.
Meaning
0
RX data changed
This bit is set if the receiver data set "1" ("job data set") is changed by manual control or by another remote client
Data memory
(see also "
FSCAN configuration changed
1
This bit is set if the FSCAN data set "1" ("job data set") is changed by manual control or by another remote client
Data memory
(see also "
2
Signal changed
This bit is set if the received signal changes in level or offset.
COR active
3
This bit is set if the COR relay becomes active.
4
SIGNal > THReshold
This bit is set if the signal level is above the squelch threshold (precondition: squelch is switched on).
INPut:ATTenuation:STATe
5
This bit is set if the input attenuator is switched on.
7
FP settings changed
This bit is set if the front-panel data set is changed by manual control or by another remote client.
8
RX settings changed
This bit is set if a parameter was changed by manual control or by another remote client in the data set
"miscellaneous".
MSCAN configuration changed
9
This bit is set if the MSCAN data set is changed by manual control or by another remote client .
10
DSCAN configuration changed
This bit is set if the DSCAN data set is changed by manual control or by another remote client (DSCAN is an
option).
12
MEMory data changed
This bit is set if a memory data was changed by manual control or by another remote client.
13
MEMory parameter changed
This bit is set if the query bit was changed by manual control or by another remote client.
4052.2000.02
" on page 126).
" on page 126).
4.138
Remote control
E-7
Advertisement
Table of Contents
Troubleshooting
