Table of Contents
Advertisement
EB200 Manual
3.18.4.3 AF configuration
This menu can be obtained by pressing the AF softkey in the RX-CONF menu.
Configuration of the AF (Audio Frequency) parameters
AF parameters and signal paths
SPEAKER:
Speaker status OFF, ON
This switch works only for the built-in loudspeaker. The AF is always available at the
headphone socket.
TONE:
ONLY, WITH AF
In the position TONE WITH AF, the audio frequency is audible additionally to the signal
tone.
BALANCE:
Between left and right audio channel at the headphone connector
The bar can be shifted to the left or to the right by spinwheel. The EB200 is not equipped
for stereo reception.
4052.2000.02
3.39
Operation
E-7
Advertisement
Table of Contents
Troubleshooting
