Description Of Commands; Notation - R&S EB200 Manual

EB200 Manual

4.5 Description of commands

Note: For overview of commands see tables in Annex C.

4.5.1 Notation

In the following sections, all commands implemented in the device are described in detail. The notation
corresponds to a large extent to that of the SCPI standards. The SCPI conformity information can be
taken from the list of commands in Annex C.
Indentations
Example:
Upper-/lower-case notation
4052.2000.02
The different levels of the SCPI command hierarchy are represented in the
description by means of indentations to the right. The lower the level is, the
further is the indentation to the right. Please observe that the complete
notation of the command always includes the higher levels as well.
SENSe:FREQuency:MODE is indicated in the description as follows:
SENSe
. :FREQuency
. . :MODE
Upper/lower-case letters serve to mark the long or short form of the key
words of a command in the description (see next section). The device itself
does not distinguish between upper- and lower-case letters.
4.13
first level
second level
third level
Remote control
E-7