Volume Potentiometer; Headphone Connector - R&S EB200 Manual

EB200 Manual Operation

3.14 Volume potentiometer

The digital potentiometer which has 24 switch positions per turn is used to vary the AF level. The levels
at the headphone connector, the integral loudspeaker and at the regulated AF-output on the rear panel
can be adjusted.
The volume of the BEEP and the sound of the key click are configured separately in the SETUP-
MESSAGE and SETUP-KEYS menu respectively (see "SETUP" on page 51).

3.15 Headphone connector

A 3.5-mm stereo banana socket for headphones is provided on the front panel. When the headphone is
plugged in, the loudspeaker is not turned off automatically but it can be cut off by menu
'AF configuration' (see "AF configuration" on page 39).
4052.2000.02 3.20 E-7