Output Subsystem - R&S EB200 Manual

EB200 Manual

4.5.12 OUTPut subsystem

OUTPut
. :AUXMode FREQuency|ANTCtrl
The AUX mode switch determines whether the frequency in BCD or the antenna number in BCD and
the CTRL byte should be output at the rear-panel AUX connector X8.
The FREQuency setting is to be used together with DF Unit EBD190.
Parameter:
FREQuency
ANTCtrl
*RST status:
ANTCtrl
Example:
OUTPut:AUXMode FREQuency
. :AUXMode?
Query of the AUX mode switch setting
Parameter:
None
Result:
frequency output
FREQ
output of antenna number and CTRL byte
ANTC
Example:
OUTPut:AUXMode? → FREQ
4052.2000.02
Frequency output at AUX
4-digits in BCD (1, 10, 100, 1000 MHz)
Output of antenna number in 2-digit BCD (ANTA1...ANTA80)
Output of binary CTRL bytes (CTRL1 ..... CTRL8)
4.46
OUTPut subsystem
E-7