R&S EB200 Manual page 72

EB200 Manual
RS 232 standard
Configuration parameters
BAUD RATE: Baud rate: 50 to 115 k with many intermediate values
FRAME: 7 or 8 data bits, 1 or 2 stop bits
PARITY: NO, ODD or EVEN
HANDSHAKE: NO, XON-XOFF or RTS-CTS
Softkeys
APPLY Branching to APPLY CHANGES submenu
PPP Switchover to RS232 PPP
APPLY CHANGES
Some parameters can be made active only by switching the unit off and on again. After confirmation the
changes to such parameters with the YES key, the following warning is output: POWER DOWN
REQUIRED FOR NEW SETTINGS.
YES: The changes are accepted. For some parameters the unit must be switched off and
on again.
NO: The changes are discarded.
4052.2000.02 3.58
Operation
E-7