Status And Error Messages - R&S EB200 Manual

EB200 Manual
Memory location status display (information to the right of the memory location number)
FULL refers to the memory location filled with receiver parameters
NOT SET corresponds to 'suppressed', SUPP softkey in the M-SCAN menu
SET corresponds to 'activated', ACTIVATE softkey in the M-SCAN - CONFIG menu

3.3.7 Status and error messages

A window for error messages can be temporarily opened by means of the softkeys. Depending on the
configuration, the window will remain open for a certain time or permanently. However, you can close
the window whenever you want with the QUIT softkey.
The ESC and ENT keys can also be used to close the window.
4052.2000.02 3.12
Operation
E-7