Wiring; Fig. 2-2: Speaker Jumper - R&S EB200 Manual

EB200 Manual
Item Designation
30 X6
OPTION
31 X5
IFWB
32 X4
REF EXT/INT
33 X13
ANT
34 X7
AUDIO
35 X8
AUX
36 X10
BATTERY PACK
37 X12
LINE
38 X91
ETHERNET
10BASE-T
39 RECEIVE
40 LINK OK

2.2 Wiring

For installation of the EB200 in a rack there is connector X13 available for connecting the antenna
(antenna connector can be internally selected).
The external speaker output is activated by setting an internal jumper which automatically sets the
internal speaker out of order.

Fig. 2-2: Speaker jumper

4052.2000.02
Function
Connection for external digital panoramic display unit (option)
Digital IF Output, connection for software update
IF output, wide (10.7 MHz ± 5 MHz)
Connection for panoramic display unit
BNC connector, 50 Ω
Input for external reference signal
or output for internal reference signal 10 MHz
Selectable in menu SETUP-REF
= 500 Ω, R
BNC connector, R
i
Antenna input for rack installation (to be selected internally)
SMA connector, 50 Ω
Audio output signals; signal level
External speaker output by setting of the internal jumpers
Universal connectors
Antenna number; control commands for external options; digital control inputs;
digital AF for DAT recorder
Connection for battery pack
Audio output for left and right stereo channel
3.5-mm connector
Connection for serial remote control LAN
Western socket
ignals eception of data via LAN interface
LED indicator s r
ignals that the LAN connection is OK
LED indicator s
2.2
= 50 Ω
a
Preparation for Use
E-7.1