Dhcp Parameters - AudioCodes Mediant 800 MSBG User Manual

Parameter

12.1.7 DHCP Parameters

The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
Parameter
Web: Enable DHCP
EMS: DHCP Enable
[DHCPEnable]
EMS: DHCP Speed Factor
[DHCPSpeedFactor]
SIP User's Manual
FORMAT SRV2IP_Index = SRV2IP_InternalDomain,
SRV2IP_TransportType, SRV2IP_Dns1, SRV2IP_Priority1,
SRV2IP_Weight1, SRV2IP_Port1, SRV2IP_Dns2, SRV2IP_Priority2,
SRV2IP_Weight2, SRV2IP_Port2, SRV2IP_Dns3, SRV2IP_Priority3,
SRV2IP_Weight3, SRV2IP_Port3;
[\SRV2IP]
For example:
SRV2IP 0 =
SrvDomain,0,Dnsname1,1,1,500,Dnsname2,2,2,501,$$,0,0,0;
Notes:
This parameter can include up to 10 indices.
If the Internal SRV table is used, the device first attempts to resolve a
domain name using this table. If the domain name isn't located, the
device performs an SRV resolution using an external DNS server.
To configure the Internal SRV table using the Web interface and for a
description of the parameters in this ini file table parameter, see
''Configuring the Internal SRV Table'' on page 92.
For an explanation on using ini file table parameters, see ''Configuring
ini File Table Parameters'' on page 368.
Table 12-7: DHCP Parameters
Determines whether Dynamic Host Control Protocol (DHCP) is
enabled.
[0] Disable = Disable DHCP support on the device (default).
[1] Enable = Enable DHCP support on the device.
Notes:
For this parameter to take effect, a device reset is required.
After you enable the DHCP server, perform the following
procedure:
a. Enable DHCP and save the configuration.
b. Perform a cold reset using the device's hardware reset
button (soft reset using the Web interface doesn't trigger the
DHCP procedure and this parameter reverts to 'Disable').
For additional information on DHCP, refer to the Product
Reference Manual.
This parameter is a special 'Hidden' parameter. Once defined and
saved in flash memory, its assigned value doesn't revert to its
default even if the parameter doesn't appear in the ini file.
Determines the DHCP renewal speed.
[0] = Disable
[1] = Normal (default)
660
Mediant 800 MSBG
Description
Description
Document #: LTRT-12804