Figure 3-246: Pptp Vpn Successfully Added - AudioCodes Mediant 800 MSBG User Manual

7. Click Next; the following is displayed if successfully configured:
8. Select the 'Edit the Newly Created Connection' check box if you want to edit the new
connection after clicking Finish.
9. Click Finish to save the settings; the new PPTP VPN connection is added to the
network connections list.
To view and edit the PPTP connection, follow the procedure below:
To edit the PPTP connection:
1. In the 'Connections' page, click the PPTP VPN link; the General tab appears
displaying general properties.
2. Select the Settings tab to edit various settings (see ''Editing Existing Connections'' on
page 328).
3. Select the Routing tab to edit the routing parameters (see ''Editing Existing
Connections'' on page 328).
4. Select the PPP tab.
•
On Demand: Select this check box to initiate the PPP session only when packets
are sent over the Internet.
•
Time Between Reconnect Attempts: Specify the duration between PPP
reconnected attempts, as provided by your ISP.
SIP User's Manual

Figure 3-246: PPTP VPN Successfully Added

Figure 3-247: PPP Tab
306
Mediant 800 MSBG
Document #: LTRT-12804