Figure 3-170: Configuring Dscp Settings - AudioCodes Mediant 800 MSBG User Manual

SIP User's Manual
To add, edit or delete DSCP settings:
1. Click the DSCP Settings item (Configuration tab > Data menu > QoS submenu >
DSCP Settings); the following page appears:
2. To edit an existing entry, click the corresponding Edit
click the New Entry link. In both cases, the following page appears.
Figure 3-171: Defining DSCP to 802.1p Priority Mapping
3. In the 'DSCP Value (hex)' field, enter a hexadecimal number for the DSCP value.
4. From the '802.1p Priority' drop-down list, select an 802.1p priority level (each priority
level is mapped to low/medium/high priority).
5. Click OK to save the settings.
Note:
Version 6.2

Figure 3-170: Configuring DSCP Settings

The DSCP value overriding the priority of incoming packets with an
unassigned value (priority 0, assumed to be a no-priority-set) is "0x0.
261
3. Web-Based Management
icon. To add a new entry,
February 2011